Tweaked Configs for Counter-Strike

[ThePig]

Here is my userconfig.cfg file that I am currently using for CS:S. It is tweaked for higher fps and has 1 binded key to buy what I usually use.


//mat_mipmaptextures 0
//mat_specular 0
//mat_trilinear 0
//mat_antialias 0
//mat_vsync 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_drawmodeldecals 0
r_rainsimulate 0
r_shadows 0
r_waterdrawreflection 0
r_waterdrawrefraction 0
r_dispenablelod 0
r_fastzreject 0
cl_dynamiccrosshair 0
cl_crosshairscale 500
cl_interpolate 1
cl_interp 0
cl_showfps 0
con_enable 1
//mat_show_texture_memory_usage 0
cl_phys_props_max 0
mp_decals 50
r_decals 50
//r_dispradius 50
//r_dispfullradius 50
//r_propsmaxdist 500
//r_rainradius 0
//r_rainsplashpercentage 0
rate 25000
cl_cmdrate 33
cl_updatetrate 40
name "[WoP]-The Pig"
zoom_sensitivity_ratio 1.2
sensitivity 6.5
r_shadows 0
cl_smooth 0
gl_cull "1"
gl_max_size "256"
precache 1
cl_interp 0.1
cl_updaterate 99
max_shells 1
max_smokepuffs 1

bind v "buy m4a1; buy ak47; buy vest; buy buyammo1; buy vesthelm; buy hegrenade"
//========================
echo :::The Pig's Config has been loaded:::
//========================

Post your config files here

[bunnylicker]

I have no idea how i would set all that.?

lol i have 9 keys bind. its very nice they are all on my key pad

456: HE flash smoke
789 PRI Scec Defuse
3 ak/m4

[payne]

You should have a userconfig.cfg file in your cs:s cfg folder. If not, just make open a new notepad file, copy and paste the config, then save it to the cfg folder as userconfig.cfg. WHen you load CS, open console and type in "exec useronfig.cfg" to load the settings.

[bunnylicker]

Thanks you very much.. What if i want it abck to normal? just in case

[payne]

Make a copy of your current config.cfg file and just replace the the config file if you want to restore it. You can also get back the default install config file by just deleting it and joining a game.

[Phobia]

May we post CS 1.6 configs?

[ThePig]

lol phobia

[Mirage]

What are some good console commands to boost fps?

[WolfmAn]

FPS & Config Settings

Note: That I do not really change my basic config for fps. Most changes you make to your config for fps are generally not allowed for league play =(

The best thing you can do to boost in game fps performance actually start with setting your video card settings to performance values. You should also set your vertical sync to off.

Now when you want to try to get the most out of your game play the values in your config that you will want to play with are the following:

cl_cmdrate, cl_updaterate, rate, and cl_smooth

cl_cmdrate
cmdrate = Number of times per second client updates server.
Set your cl_cmdrate slightly (5) over your fps. This will ensure that you are sending out as many commands as possible. If your connection cant handle that and you start to lag, then simply set your cl_cmdrate as HIGH as possible until you dont lag in messy situations (gunbattle). We want to send as much data to the server as possible.

cl_updaterate
updaterate = number of updates client requests from the server per second | interpolation time.
Our cl_updaterate should be equal to the servers sv_maxupdaterate. This works in the same way as I explained cl_cmdrate. We want the MAX commands as possible. So setting this to the servers MAX rate will accomplish this. Over the max rate is not desirable.

If you do not know a servers updaterate you can perform the following test: In console open your netgraph (net_graph 1)
The change your updaterate to 100 (cl_updaterate 100)
Run around and play but watch your net_graph. If you are getting alot of yellow dots or lines lower the updaterate by 10 until you get very little to no yellow at all. Yellow represents packet loss which = bad.

key note: By defualt servers are set to cl_updaterate of 20.

Rate
Rate = maximum limit of bytes per second the server can send to the client.
Well, all we have to do with rate is gradually raise it until we are recieving no choke in gun battles. This will guarantee that all our packets/commands are being sent and received.

cl_smooth
smooth = takes number of packets over a given time and averages them.

Setting cl_smooth to 0 shows stops the source engine from averaging out what you see. So if you are laggy and shoot someone only to find that they are a fraction of a second past where you shot try setting this to 0. I personally just leave it at 1. I ahve no problems other then reaction time when I miss.

[WolfmAn]

Config & Scripts

Just keep in mind that I'm left handed

config.cfg
unbindall
bind "TAB" "+showscores"
bind "ENTER" "+voicerecord"
bind "ESCAPE" "cancelselect"
bind "SPACE" "+use"
bind "," "exec wopname.cfg"
bind "." "exec name.cfg"
bind "0" "rs10"
bind "1" "rs1"
bind "2" "rs2"
bind "3" "rs3"
bind "4" "rs4"
bind "5" "rs5"
bind "6" "rs6"
bind "7" "rs7"
bind "8" "rs8"
bind "9" "rs9"
bind "R" "admin"
bind "`" "toggleconsole"
bind "a" "regroup"
bind "b" "buymenu"
bind "c" "enemyspot"
bind "f" "impulse 100"
bind "h" "commandmenu"
bind "i" "showbriefing"
bind "j" "cheer"
bind "m" "chooseteam"
bind "n" "nightvision"
bind "p" "fps"
bind "s" "enemydown"
bind "t" "impulse 201"
bind "u" "messagemode2"
bind "v" "roger"
bind "x" "inposition"
bind "y" "messagemode"
bind "z" "sectorclear"
bind "BACKSPACE" "ng"
bind "UPARROW" "+forward"
bind "DOWNARROW" "+back"
bind "LEFTARROW" "+moveleft"
bind "RIGHTARROW" "+moveright"
bind "ALT" "radiocyc"
bind "CTRL" "+duck"
bind "SHIFT" "+speed"
bind "F1" "autobuy"
bind "F2" "rebuy"
bind "F4" "bug"
bind "F5" "jpeg"
bind "F8" "use weapon_knife"
bind "F9" "use weapon_smokegrenade"
bind "F10" "slot1"
bind "F11" "slot2"
bind "F12" "+fire"
bind "INS" "buy deagle"
bind "DEL" "buy ak47; buy m4a1;"
bind "PGDN" "buy awp"
bind "PGUP" "buy galil; buy famas;"
bind "HOME" "buy mp5"
bind "END" "buy aug; buy sg550;"
bind "KP_HOME" "buy vest"
bind "KP_UPARROW" "buy vesthelm"
bind "KP_PGUP" "buy defuser"
bind "KP_LEFTARROW" "buy hegrenade"
bind "KP_5" "buy flashbang"
bind "KP_RIGHTARROW" "buy smokegrenade"
bind "KP_END" "slot5"
bind "KP_DOWNARROW" "buy primammo"
bind "KP_PGDN" "buy secammo"
bind "KP_INS" "+jump"
bind "KP_DEL" "buy defuser"
bind "KP_PLUS" "drop"
bind "MWHEELDOWN" "use weapon_flashbang"
bind "MWHEELUP" "use weapon_hegrenade"
bind "MOUSE1" "+attack"
bind "MOUSE2" "+attack2"
bind "MOUSE3" "+reload"
bind "PAUSE" "pause"
muzzleflash_light "1"
cl_buy_favorite_quiet "0"
cl_buy_favorite_nowarn "0"
cl_autowepswitch "0"
cl_autohelp "0"
cl_radartype "1"
cl_radaralpha "255.000000"
cl_locationalpha "150"
cl_crosshaircolor "1"
cl_dynamiccrosshair "1"
cl_scalecrosshair "1"
cl_crosshairscale "1200"
cl_crosshairalpha "200"
cl_crosshairusealpha "0"
spec_scoreboard "0"
cl_spec_mode "5"
cl_righthand "0"
cl_team "default"
cl_class "default"
closecaption "0"
cc_linger_time "1.0"
cc_predisplay_time "0.25"
cc_subtitles "0"
cc_lang ""
crosshair "1"
cl_observercrosshair "1"
cam_command "0"
cam_snapto "0"
cam_idealyaw "90"
cam_idealpitch "0"
cam_idealdist "64"
c_maxpitch "90"
c_minpitch "0"
c_maxyaw "135"
c_minyaw "-135"
c_maxdistance "200"
c_mindistance "30"
c_orthowidth "100"
c_orthoheight "100"
joy_name "joystick"
joy_forwardthreshold "0.15"
joy_sidethreshold "0.15"
joy_pitchthreshold "0.15"
joy_yawthreshold "0.15"
joy_forwardsensitivity "-1"
joy_sidesensitivity "-1"
joy_pitchsensitivity "1"
joy_yawsensitivity "-1"
joy_wingmanwarrier_centerhack "0"
joy_wingmanwarrier_turnhack "0"
joy_diagonalpov "0"
cl_upspeed "320"
cl_forwardspeed "400"
cl_backspeed "400"
lookspring "0"
lookstrafe "0"
joystick "0"
m_pitch "0.022"
m_filter "1"
sensitivity "1.6"
m_side "0.8"
m_yaw "0.022"
m_forward "1"
m_customaccel "0"
m_customaccel_scale "0.04"
m_customaccel_max "0"
m_customaccel_exponent "1"
m_mouseaccel1 "0"
m_mouseaccel2 "0"
m_mousespeed "1"
cl_mouselook "1"
cl_idealpitchscale "0.8"
net_graph "0"
net_scale "5"
net_graphpos "2"
net_graphsolid "1"
voice_modenable "1"
hud_fastswitch "1"
commentary_firstrun "0"
scene_showfaceto "0"
ai_report_task_timings_on_limit "0"
ai_think_limit_label "0"
npc_height_adjust "1"
scene_showlook "0"
scene_showmoveto "0"
func_break_max_pieces "15"
suitvolume "0.25"
sv_noclipaccelerate "5"
sv_noclipspeed "5"
sv_specaccelerate "5"
sv_specspeed "3"
sv_specnoclip "1"
sv_skyname "sky_dust"
sv_backspeed "0.6"
voice_forcemicrecord "1"
voice_enable "1"
voice_scale "1"
snd_duckerthreshold "0.15"
snd_duckerreleasetime "2.5"
snd_duckerattacktime "0.5"
snd_ducktovolume "0.55"
adsp_debug "0"
dsp_dist_max "1440"
dsp_dist_min "0"
snd_mixahead "0.1"
snd_musicvolume "1.0"
volume "1.000000"
snd_pitchquality "1"
snd_digital_surround "0"
vprof_warningmsec "10"
vprof_unaccounted_limit "0.3"
vprof_verbose "0"
vprof_graphheight "256"
vprof_graphwidth "512"
texture_budget_background_alpha "128"
texture_budget_panel_bottom_of_history_fraction ".25"
texture_budget_panel_height "284"
texture_budget_panel_width "512"
texture_budget_panel_y "450"
texture_budget_panel_x "0"
budget_panel_height "384"
budget_panel_width "512"
budget_panel_y "50"
budget_panel_x "0"
budget_background_alpha "128"
budget_bargraph_range_ms "16.6666666667"
budget_panel_bottom_of_history_fraction ".25"
budget_history_range_ms "66.666666667"
budget_history_numsamplesvisible "100"
budget_show_history "1"
budget_show_averages "0"
budget_show_peaks "1"
budget_averages_window "30"
budget_peaks_window "30"
budget_bargraph_background_alpha "128"
sv_forcepreload "0"
sv_voiceenable "1"
sv_logbans "0"
sv_log_onefile "0"
sv_logecho "1"
sv_logfile "1"
sv_logsdir "logs"
dsp_enhance_stereo "1"
dsp_volume "1.0"
dsp_slow_cpu "0"
cl_allowupload "1"
mp_decals "200.000000"
r_drawmodelstatsoverlaymax "1.5"
r_drawmodelstatsoverlaymin "0.1"
r_eyesize "0"
r_eyeshift_z "0"
r_eyeshift_y "0"
r_eyeshift_x "0"
r_eyemove "1"
r_eyegloss "1"
skill "1"
r_aspectratio "0"
con_enable "1"
cl_downloadfilter "all"
cl_allowdownload "1"
cl_forcepreload "0"
cl_soundfile "sound/player/jingle.wav"
cl_logofile "materials/vgui/logos/spray_insights.vtf"
cl_timeout "30"
cl_showpluginmessages "1"
tv_nochat "0"
cl_cmdbackup "2"
sv_unlockedchapters "1"
bgmvolume "1"
cl_updaterate "100"
cl_cmdrate "100"

script.cfg
developer 1

echo
echo SCRIPT.cfg loading . . . . .
echo

developer 0

//********************************************//
//******************SCRIPTS******************//
//******************************************//

// FPS Viewer //
alias fps "incrementvar cl_showfps 0 1 1"
bind "p" "fps"

//Net_Graph 1 Toggle
alias ng "+ng"
alias +ng "net_graph 1; alias ng -ng"
alias -ng "net_graph 0; alias ng +ng"
bind "backspace" "ng"

//NAMESWAP Binds
bind "," "exec wopname.cfg"
bind "." "exec name.cfg"

//AWP Attack Button
alias w6 "wait;wait;wait;wait;wait;wait;"
alias +fire "+attack2; w6; -attack2; w6"
alias -fire "+attack; w6; -attack; slot2; w6; slot1"

developer 1

echo
echo SCRIPT.cfg loaded . . . . .
echo

developer 0
mouse.cfg
echo
echo Mouse.cfg loading . . . . .
echo


//********************************************//
//****************MOUSE SETUP****************//
//******************************************//

bind "MOUSE1" "+attack"
bind "MOUSE2" "+attack2"
bind "MOUSE3" "+reload"
bind "MWHEELDOWN" "use weapon_flashbang"
bind "MWHEELUP" "use weapon_hegrenade"
bind "F8" "use weapon_knife"
bind "F9" "use weapon_smokegrenade"
bind "F10" "slot1"
bind "F11" "slot2"
bind "kp_end" "slot5"
bind "f12" "+fire"

echo
echo Mouse.cfg loaded . . . . .
echo
buy.cfg
developer 1
echo
echo Weapons & Equipment.cfg loading . . . . .
echo
developer 0

//********************************************//
//******************WEAPONS******************//
//******************************************//

bind "ins" "buy deagle"

bind "home" "buy mp5"

bind "pgup" "buy galil; buy famas;"

bind "del" "buy ak47; buy m4a1;"

bind "end" "buy aug; buy sg550;"

bind "pgdn" "buy awp"

bind "kp_slash" ""

bind "kp_minus" ""


//********************************************//
//*****************EQUIPMENT*****************//
//******************************************//


bind "kp_leftarrow" "buy hegrenade"

bind "kp_5" "buy flashbang"

bind "kp_rightarrow" "buy smokegrenade"

bind "kp_home" "buy vest"

bind "kp_uparrow" "buy vesthelm"

bind "kp_del" "buy defuser"

bind "kp_pgdn" "buy secammo"

bind "kp_downarrow" "buy primammo"

developer 1
echo
echo Weapons & Equipment.cfg loaded . . . . .
echo
developer 0

radiocycle.cfg
echo
echo RADIO CYCLE.CFG loading . . . . .
echo


//********************************************//
//****************RADIOCYCLE*****************//
//******************************************//

alias r1 radio1
alias r2 radio2
alias r3 radio3
alias "rcbind1" "bind 1 rs1; bind 2 rs2; bind 3 rs3; bind 4 rs4; bind 5 rs5"
alias "rcbind2" "bind 6 rs6; bind 7 rs7; bind 8 rs8; bind 9 rs9; bind 0 rs10"
alias "rcbind" "rcbind1; rcbind2"
alias "rs1" "slot1; alias radiocyc rc1; rebind"
alias "rs2" "slot2; alias radiocyc rc1; rebind"
alias "rs3" "slot3; alias radiocyc rc1; rebind"
alias "rs4" "slot4; alias radiocyc rc1; rebind"
alias "rs5" "slot5; alias radiocyc rc1; rebind"
alias "rs6" "slot6; alias radiocyc rc1; rebind"
alias "rs7" "slot7; alias radiocyc rc1; rebind"
alias "rs8" "slot8; alias radiocyc rc1; rebind"
alias "rs9" "slot9; alias radiocyc rc1; rebind"
alias "rs10" "slot10; alias radiocyc rc1; rebind"
alias "radiocyc" "rc1"
alias "rc1" "r1; alias radiocyc rc2; rcbind"
alias "rc2" "r2; alias radiocyc rc3; rcbind"
alias "rc3" "r3; alias radiocyc rc1; rcbind"
alias "rebind1" "bind 1 slot1; bind 2 slot2; bind 3 slot3; bind 4 slot4; bind 5 slot5"
alias "rebind2" "bind 6 slot6; bind 7 slot7; bind 8 slot8; bind 9 slot9; bind 0 slot10"
alias "rebind" "rebind1; rebind2"

bind "alt" "radiocyc"

echo
echo RADIO CYCLE.CFG loaded . . . . .
echo
radio.cfg
developer 1
echo
echo RADIO.cfg loading . . . . .
echo
developer 0

//********************************************//
//****************RADIO TALK*****************//
//******************************************//

bind "z" "sectorclear"
bind "x" "inposition"
bind "c" "enemyspot"
bind "v" "roger"
bind "a" "regroup"
bind "s" "enemydown"

developer 1
echo
echo RADIO.cfg loaded . . . . .
echo
developer 0
Autoexec.cfg
echo
echo Loading Configs . . . . .
echo

exec "script.cfg"
exec "radio.cfg"
exec "radiocycle.cfg"
exec "buy.cfg"
exec "mouse.cfg"


echo
echo Configs Loaded . . . . .
echo

[0wnage]

hopefully u didnt type all of that

[g h o s t]

hey, pig i did exactly what u told bunny to do for the userconfig file and it didnt work. i copy and pasted ur config to notepad and saved it as "userconfig.cfg" in the cfg folder of cs:s. evertime i go into console and type "exec userconfig.cfg" it just says couldnt blah blah blah... so some help plz

[ThePig]

Can u post a screenshot? Some of the commands don't work because I copied some of it from CS 1.6 and added to it and probably didnt delete the commands that are now obsolete in Source

[g h o s t]

ill play around with the commands then to see what i can get working. thanks

[JeLLo]

I have the same problem the userconfig wont load.
I'll get some pics up asap 8)
If it works nvm :)

[Dr. Bunsen]

Maybe you've already tried this, but you have to save the file as "All Types" not .txt, else your system just would label it userconfic.cfg.txt and consider it a txt file.

[Tk]

Not a bad setup but I have a few problems with it.

[Paradox]

ownage lmao i do hope he dint though poor guy :P

[kyleo1234]

//mat_mipmaptextures 0
//mat_specular 0
//mat_trilinear 0
//mat_antialias 0
//mat_vsync 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_drawmodeldecals 0
r_rainsimulate 0
r_shadows 0
r_waterdrawreflection 0
r_waterdrawrefraction 0
r_dispenablelod 0
r_fastzreject 0
cl_cmdbackup 2
cl_cmdrate 101
cl_lagcomp_errorcheck 1
cl_lagcompensation 1
cl_updaterate 101
cl_smooth 1
rate 25000
cl_ejectbrass 0
cl_forcepreload 1
cl_dynamiccrosshair 0
cl_crosshairscale 500
cl_interpolate 1
cl_interp 0.01
cl_showfps 0
con_enable 1
muzzleflash_light 0
//mat_show_texture_memory_usage 0
cl_phys_props_max 0
mp_decals 50
r_decals 50
//r_dispradius 50
//r_dispfullradius 50
//r_propsmaxdist 500
//r_rainradius 0
//r_rainsplashpercentage 0
rate 25000
cl_cmdrate 33
cl_updatetrate 40
name "Kyleo1234"
zoom_sensitivity_ratio 1.2
sensitivity 6.5
r_shadows 0
cl_smooth 0
gl_cull "1"
gl_max_size "256"
precache 1
cl_interp 0.1
cl_updaterate 99
max_shells 1
max_smokepuffs 1
violence_ablood 1
violence_agibs 1
violence_hblood 1
violence_hgibs 1
budget_show_history 0
cl_downloadfilter "nosounds"
jpeg_quality 100
mat_monitorgamma 1.6

bind 1 "buyammo1"
bind 2 "buyammo2"
bind 3 "buy hegrenade"
bind 4 "buy flashbang"
bind 5 "buy smokegrenade"
bind 6 "buy vest"
bind 7 "buy vesthelm"
bind 8 "buy ak47; buy m4a1"
bind 9 "buy awp"
bind 0 "buy defuser"
bind v "buy m4a1; buy ak47; buy vest; buyammo1; buy vesthelm; buy hegrenade"


//========================
echo :::::::::::::: Kyle01234's Config has been loaded:::::::::::::
//========================
mp_autoteambalance 0
mp_freezetime 0
mp_limitteams 0

[Mackaybre]

Yeah, see I like having the number keys bound to the weapons, it's just easier to reach and have the Scrollbutton on my mouse bound to something else.

[kyleo1234]

i cut a piece of paper and drew lines the width of a key and put it over the numbers so above key 1 it says ammo1, key 8 ak/m4, etc...

[Sergio]

If I wanted to bind say buyammo1 to a numlock button would it be bind numlock1 "buyammo1" ?

[Abudoggie]

delete for double post

[Abudoggie]

Kyle:

FWIW: You have two conflicting updaterates:

cl_updaterate 40
AND
cl_updaterate 99

Your system will use the last one in the file (99).

For others copying various tidbits of these configs.... the command lines that start with // means that command is disabled. If you want that feature, remove the //. Otherwise you may want to delete the entire line since it is not active and is just taking up space in your file. The // can be handy if you want to test a command on/off without deleting it. :wink:

[RaZeR]

the pig what if i left all my thingys in ther and Copyed All yours... what would happen plz aim me ryan28610

[KissofDeath]

once u have a bind for purchasing a gun or something else, how would u get rid of it if u didnt want it?

[Hazard]

once u have a bind for purchasing a gun or something else, how would u get rid of it if u didnt want it?

bind (key) ""

[Yohei]

This is my autoexec.cfg, my config.cfg is at default.

//Yohei's Counter-Strike: Source autoexec.cfg//

//Developer//
alias d1 "developer 1"
alias d0 "developer 0"

//Name//
name "Yohei"

//Rates and Net Graphs//
net_graph "3"
fps_max "101"
rate "25000"
cl_cmdrate "101"
cl_updaterate "101"

//Console//
con_enable "1"

//Client//
cl_autowepswitch "1"
cl_righthand "1"
cl_interp "0.1"

//Crosshair and Mouse//
crosshair "1"
cl_observercrosshair "1"
cl_scalecrosshair "1"
cl_crosshairscale "768"
cl_crosshaircolor "4"
sensitivity "3"
zoom_sensitivity_ratio "1.2"

//Weapons//
max_shells "1"
max_smokepuffs "1"

//World//
mp_decals "100.000000"

//HUD//
hud_fastswitch "1"
hud_centerid "1"

//Server//
mp_freezetime "0"
mp_autoteambalance "0"

//Buybinds//
bind "mwheeldown" "buy m4a1; buy ak47; buy primammo; buy vest; buy primammo; buy vesthelm; buy defuser; buy hegrenade; buy flashbang; buy flashbang; buy primammo; buy usp; buy secammo; buy secammo; d1; echo AK47/M4A1 Max-Pack Bought; d0"
bind "mouse3" "buy vest; buy primammo; buy primammo; buy vesthelm; buy primammo; buy primammo; buy primammo; buy hegrenade; buy usp; buy secammo; buy flashbang; buy secammo; buy flashbang; buy secammo; buy defuser; d1; echo Refill Pack Bought; d0"
bind "mwheelup" "buy mp5; buy vest; buy primammo; buy primammo; buy primammo; buy hegrenade; buy flashbang; buy m3; d1; echo Poor-Pack Bought; d0"
bind "del" "buy deagle; buy secammo; buy secammo; buy secammo; buy secammo; buy vest; buy vesthelm; buy flashbang; buy flashbang; d1; echo First-Round Pack Bought; d0"

//Echo's//
d1
echo
echo "Yohei's Counter-Strike: Source Autoexec.cfg Loaded"
echo
d0

[ThePig]

my latest one:

//============
// CSSToolz
//============
bind MWHEELup +jump
cl_phys_props_enable 0
cl_ragdoll_physics_enable 0
cl_show_splashes 0
cl_smooth 0
cl_c4dynamiclight 0
cl_ejectbrass 0
cl_ragdoll_collide 0
cl_show_bloodspray 0
fog_enable 0
fog_enable_water_fog 0
//mat_bloom 0
//mat_bumpmap 0
//mat_clipz 0
//mat_fastnobump 1
mat_filterlightmaps 0
//mat_filtertextures 0
//mat_mipmaptextures 0
//mat_specular 0
//mat_trilinear 0
//mat_antialias 0
//mat_vsync 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_drawmodeldecals 0
r_rainsimulate 0
r_waterdrawreflection 0
r_waterdrawrefraction 0
r_dispenablelod 0
r_fastzreject 0
cl_dynamiccrosshair 0
cl_crosshairscale 500
cl_interpolate 1
cl_showfps 0
con_enable 1
//mat_show_texture_memory_usage 0
cl_phys_props_max 0
mp_decals 50
r_decals 50
//r_dispradius 50
//r_dispfullradius 50
//r_propsmaxdist 500
//r_rainradius 0
//r_rainsplashpercentage 0
rate 25000
cl_cmdrate 99
name "[WoP]-The Pig"
zoom_sensitivity_ratio 1.2
sensitivity 6.5
r_shadows 0
cl_smooth 0
gl_cull "1"
gl_max_size "256"
precache 1
cl_interp 0.01
cl_updaterate 99
max_shells 1
max_smokepuffs 1
fps_max 99
bind v "buy m4a1; buy ak47; buy vest; buyammo1; buy vesthelm; buy hegrenade"
bind space +jump
unbind i
//========================
echo :::The Pig's Config has been loaded:::
//========================
mp_autoteambalance 0
mp_freezetime 0
mp_limitteams 0

[thejinx0r]

I tried to use your cfg file, and it gave me these errors:
Unknown command "cl_show_bloodspray"
Unknown command "r_dispenablelod"
Unknown command "gl_cull"
Unknown command "gl_max_size"
Unknown command "precache"
Unknown command "max_shells"
Unknown command "max_smokepuffs"

Can you help me out please?

my latest one:

//============
// CSSToolz
//============
bind MWHEELup +jump
cl_phys_props_enable 0
cl_ragdoll_physics_enable 0
cl_show_splashes 0
cl_smooth 0
cl_c4dynamiclight 0
cl_ejectbrass 0
cl_ragdoll_collide 0
cl_show_bloodspray 0
fog_enable 0
fog_enable_water_fog 0
//mat_bloom 0
//mat_bumpmap 0
//mat_clipz 0
//mat_fastnobump 1
mat_filterlightmaps 0
//mat_filtertextures 0
//mat_mipmaptextures 0
//mat_specular 0
//mat_trilinear 0
//mat_antialias 0
//mat_vsync 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_drawmodeldecals 0
r_rainsimulate 0
r_waterdrawreflection 0
r_waterdrawrefraction 0
r_dispenablelod 0
r_fastzreject 0
cl_dynamiccrosshair 0
cl_crosshairscale 500
cl_interpolate 1
cl_showfps 0
con_enable 1
//mat_show_texture_memory_usage 0
cl_phys_props_max 0
mp_decals 50
r_decals 50
//r_dispradius 50
//r_dispfullradius 50
//r_propsmaxdist 500
//r_rainradius 0
//r_rainsplashpercentage 0
rate 25000
cl_cmdrate 99
name "[WoP]-The Pig"
zoom_sensitivity_ratio 1.2
sensitivity 6.5
r_shadows 0
cl_smooth 0
gl_cull "1"
gl_max_size "256"
precache 1
cl_interp 0.01
cl_updaterate 99
max_shells 1
max_smokepuffs 1
fps_max 99
bind v "buy m4a1; buy ak47; buy vest; buyammo1; buy vesthelm; buy hegrenade"
bind space +jump
unbind i
//========================
echo :::The Pig's Config has been loaded:::
//========================
mp_autoteambalance 0
mp_freezetime 0
mp_limitteams 0

[payne]

you can ignore those error or just delete those entries. Steam updated cs a few times and those commands were probably removed.

[|CC|EasyKill]

most of my auto was given to me but now reading the // meaning i'm not sure what works and what doesn't. for some reason my p90 bind just stopped working as well. I try to find it in the blog config but it's all jumbled up- but even if i fix it and play when i go back to it it's jumbled again????
here it is though:

// Set netcode settings
// Adjusts hitboxes and netcode settings for optimal registration

cl_cmdbackup 2
cl_cmdrate 101
cl_interp 0.01
cl_interpolate 1
cl_lagcomp_errorcheck 1
cl_lagcompensation 1
cl_updaterate 101
cl_smooth 1
rate 25000

// Set graphics settings
// adjusts graphics settings to boost framerate

cl_ejectbrass 0 // Disables shells flying out of guns
cl_forcepreload 1 // Forces preload to help increase performance
cl_phys_props_enable 0 // Disables trash and cans etc
cl_phys_props_max 0 // Disables trash and cans etc
cl_radartype 1 // Solid radar
cl_ragdoll_physics_enable 0 // Disables dead animations and bodies
cl_show_splashes 0 // Disables splashes when in water
fps_max 101 // Caps FPS
mat_antialias 0 // Disables antialiasing
mat_bloomscale 0
mat_bumpmap 0 // Disables bumpmapping
mat_clipz 1 // Disabled non visible object rendering
mat_fastnobump 1 // Faster bump mapping
mat_fastspecular 1 // Fast specular lighting
mat_mipmaptextures 1 // Texture quality decreases with distance
mat_hdr_enabled 0 // Disables high dynamic range lighting
mat_picmip 2 // Lower texture quality--set between 0 and 4_
mat_reducefillrate 1 // Reduces shader fill rate
mat_specular 0 // Disables specular lighting
mat_trilinear 0 // Disables trilinear filtering
mat_wateroverlaysize 16 // Lowers water quality
mat_vsync 0 // Disables vertical synchronization
mp_decals 50 // How many bullets etc will be shown
muzzleflash_light 0 // Disables muzzleflash
r_avglight 0 // Disables average lighting
r_cheapwaterend 1 // Worse water rendering
r_cheapwaterstart 1 // Worse water rendering
r_drawflecks 0 // Disables bullet impacts
r_drawmodeldecals 0 // Disables decals on models
r_dynamic 0 // Disables dynamic lighting
r_eyes 0 // Removes eyes from player models
r_lightaverage 0 // Disables average lighting
r_lightinterp 0 // Disables light interpolation
r_lod 3 // Adjusts model quality--set between -5 and 5
r_occlusion 0 // Disables occlusion--lowers image quality but gains FPS
r_propsmaxdist 100 // Lower object fading distance
r_renderoverlayfragment 0
r_rootlod 2 // Lower overall game detail level
r_shadows 1 // Set to 0 to disable shadows (not recommended)
r_teeth 0 // Removes teeth from player models
r_waterforceexpensive 0 // Disables high-quality water
rope_averagelight 0 // Disables average lighting on ropes
rope_smooth 0 // Disables antialiasing on ropes
rope_subdiv 0rope_wind_dist 0 // Disables wind effects on ropes

// Set instruction sets
// Note: verify processor support before enabling

// r_3dnow 1 // Enables 3DNow! instruction set
// r_mmx 1 // Enables MMX instruction set
// r_sse 1 // Enables SSE instruction set
// r_sse2 1 // Enables SSE2 instruction set

// Set violence settings
// Increases blood to help you see hits better

violence_ablood 1
violence_agibs 1
violence_hblood 1
violence_hgibs 1

// Set HUD and xhair settings

// Adjusts HUD and xhair for easy viewing


cl_crosshairalpha 999 // Bright crosshair
cl_crosshairusealpha 1 // Enables adjustable crosshair brightness
cl_dynammiccrosshair 0 // ENABLES CHANGE IN MOVEMENT
cl_crosshairscale 375 // CROSS HAIR SIZE
cl_crosshaircolor 1 // OLOR 1-5
cl_c4progressbar 1 // Enables C4 progress bar
cl_radaralpha 255 // Maximum radar brightness
cl_radartype 1 // Enables solid radar
hud_centerid 1 // Centers player IDs
net_graph 4 // Enables net_graph 3
net_graphpos 1 // Right Align

// Set various settings

budget_show_history 0 // Disables history graph
cl_downloadfilter "nosounds" // Disables annoying sound downloads
jpeg_quality 100 // High quality screenshots
mat_monitorgamma 1.6 // Maximum ingame brightness
net_graph 4 // Enables net_graph 3
net_graphpos 1 // Adjusts netgraph position-set between 1 and 3
sv_forcepreload 1 // Forces preload to help increase performan


bind "HOME" "buy flashbang;buy flashbang;buy smokegrenade"
bind "KP_HOME" "buy sg552; buy p228; buy aug; buy vesthelm; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_UPARROW" "buy famas; buy vesthelm; buy defuser; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_PGUP" "buy p90; buy vesthelm; buy defuser; buy hegrenade; buy flashbang;bind "KP_LEFTARROW" "buy m4a1; buy ak47; buy vesthelm; buy defuser; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_5" "buy deagle; buy vesthelm; buy secammo; buy defuser; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_RIGHTARROW" "buy defuser"
bind "KP_END" "buy mp5; buy vesthelm; buy defuser; buy primammo; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_DOWNARROW" "buy m3; buy vesthelm; buy defuser; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_PGDN" "buy scout; buy vesthelm; buy defuser; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_INS" "buy awp; buy vesthelm; buy defuser; buy hegrenade; buy flashbang; buy smokegrenade"
bind "KP_DEL" "buy defuser; buy vesthelm; buy hegrenade; buy flashbang; buy flashbang; buy smokegrenade"
bind "F7" "say @ We?re here to have fun, Please act more mature than that! Thank You, |CC|"
bind "F8" "say @menu"
bind "F9" "say @ Last Warning!!"
bind "-" "say bet ct all"
bind "=" "say bet t all"
bind "CAPSLOCK" "+duck"
bind "MWHEELDOWN" "invnext"
bind "MWHEELUP" "invprev"
bind "MOUSE5" "+reload"
bind "c" "+voicerecord"
cl_restrict_server_commands "0"

[pappose]

just started playing 1.6 do you know where to get any good configs or your own? please reply asap. that are legal

[revolt]

I actually have a pretty dodgy computor, 5 years old, 512 RAM, 1.8 Gb CPU etc!

But i find i can get consistently 60-70 fps and have all my video qualities at moderately high with this config i made with my fBang mate!


// _Load Revolts Config Biatches!_

cl_cmdbackup 2
cl_cmdrate 101
cl_interp 0.01
cl_interpolate 1
cl_lagcomp_errorcheck 1
cl_lagcompensation 1
cl_updaterate 101
cl_smooth 1
rate 25000

// _Set graphics settings_
// _adjusts graphics settings to boost framerate_

cl_forcepreload 1 // _forces preload to help increase performance_
cl_phys_props_enable 0 // _disables trash and cans etc_
cl_phys_props_max 0 // _disables trash and cans etc_
cl_ragdoll_physics_enable 0 // _disables dead animations and bodies_
cl_show_splashes 0 // _disables splashes when in water_
fps_max 101 // _caps FPS_
mat_forceaniso 0 // _disables anisotropic filtering_
mat_antialias 0 // _disables antialiasing_
mat_bloomscale 0
mat_bumpmap 0 // _disables bumpmapping_
mat_clipz 1 // _disabled non visible object rendering_
mat_fastnobump 1 // _faster bump mapping_
mat_fastspecular 1 // _fast specular lighting_
mat_mipmaptextures 1 // _texture quality decreases with distance_
mat_hdr_enabled 0 // _disables high dynamic range lighting_
mat_picmip 1 // _lower texture quality--set between 0 and 4_
mat_reducefillrate 1 // _reduces shader fill rate_
mat_specular 0 // _disables specular lighting_
mat_trilinear 0 // _disables trilinear filtering_
mat_wateroverlaysize 16 // _lowers water quality_
mat_vsync 0 // _disables vertical synchronization_
mp_decals 50 // _how many bullets etc will be shown_
muzzleflash_light 0 // _disables muzzleflash_
r_3dsky 0 // _disables 3D skybox_
r_avglight 0 // _disables average lighting_
r_cheapwaterend 1 // _worse water rendering_
r_cheapwaterstart 1 // _worse water rendering_
r_decal_cullsize 2 // _lower texture quality at distance_
r_decals 0 // _disables player sprays_
r_drawdetailprops 0 // _disables detail props_
r_drawflecks 0 // _disables bullet impacts_
r_drawmodeldecals 0 // _disables decals on models_
r_dynamic 0 // _disables dynamic lighting_
r_eyes 0 // _removes eyes from player models_
r_lightaverage 0 // _disables average lighting_
r_lightinterp 0 // _disables light interpolation_
r_lod 0 // _adjusts model quality--set between -5 and 5_
r_occlusion 0 // _disables occlusion--lowers image quality but gains FPS_
r_propsmaxdist 100 // _lower object fading distance_
r_renderoverlayfragment 0
r_rootlod 2 // _lower overall game detail level_
r_shadows 1 // _set to 0 to disable shadows (not recommended)_
r_teeth 0 // _removes teeth from player models_
r_waterforceexpensive 0 // _disables high-quality water_
rope_averagelight 0 // _disables average lighting on ropes_
rope_smooth 0 // _disables antialiasing on ropes_
rope_subdiv 0
rope_wind_dist 0 // _disables wind effects on ropes_

// _Set instruction sets_
// _note: verify processor support before enabling_

//r_3dnow 1 // _enables 3DNow! instruction set_
//r_mmx 1 // _enables MMX instruction set_
//r_sse 1 // _enables SSE instruction set_
//r_sse2 1 // _enables SSE2 instruction set_

// _Set violence settings_
// _increases blood to help you see hits better_

violence_ablood 1
violence_agibs 1
violence_hblood 1
violence_hgibs 1

// _Set HUD and xhair settings_
// _adjusts HUD and xhair for easy viewing_

cl_crosshaircolor 0 // _green crosshair_
cl_crosshairalpha 999 // _bright crosshair_
cl_crosshairusealpha 1 // _enables adjustable crosshair brightness_
cl_c4progressbar 1 // _enables C4 progress bar_
hud_centerid 1 // _centers player IDs_
net_graph 3 // _enables net_graph 3--CAL required!_
net_graphpos 1 // _adjusts netgraph position-set between 1 and 3_
cl_crosshairscale 7000 // _makes crosshair smallest possible scale

// _Set various settings_

budget_show_history 0 // _disables history graph_
cl_downloadfilter "nosounds" // _disables annoying sound downloads_
jpeg_quality 100 // _high quality screenshots_
mat_monitorgamma 1.6 // _maximum ingame brightness_
sv_forcepreload 1 // _forces preload to help increase performance_

// _Binds_

bind "mwheelup" "+jump; wait; wait; -jump"
bind "mwheeldown" "+jump; wait; wait; -jump"
bind "v" "+voicerecord"

echo
echo
echo "---------------------"
echo "Revolts Config Loaded"
echo "---------------------"
echo
echo

[stalkers]

lo guys after put in the pigs user config...my flashlight dos,nt work ..i cant hear it clicking on but no light....can you shed any light on this prob please ????/

many thanks

stalkers(sco)

[BlAcK||iCe]

lo guys after put in the pigs user config...my flashlight dos,nt work ..i cant hear it clicking on but no light....can you shed any light on this prob please ????/

many thanks

stalkers(sco)

Is that on your own "created server" or all servers?

[stalkers]

on all servers m8....

[CreaTurE]

i think there is a bind for F for flash light in ur cfg maybe try to see if you can change it back or go in keyboard options and make sure that F is set as that.

[stalkers]

yeah i tried that but it was still the same and i dont have any binds to it...apart from f= flashlight...:confused: i can hear it when i switch it on but theres no light,,,

cl_cmdrate 99
cl_updaterate 99
rate 25000
cl_cmdbackup 2
cl_interp 0.01
cl_interp_all 0
cl_interpolate 1
cl_lagcompensation 1
cl_lagcomp_errorcheck 1
cl_smooth 0
cl_smoothtime 0.01
cl_predictweapons "1"
cl_pred_optimize "2"
sv_unlag "1"
net_maxfragments "1280"
cl_showfps 0
con_enable 1
//mat_show_texture_memory_usage 0

cl_forcepreload 1
cl_phys_props_enable 0
cl_phys_props_max 0
fps_max 99
mat_wateroverlaysize 16
mat_hdr_enabled "0"
r_3dsky 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_shadows 0
r_teeth 0
r_waterdrawreflection 0
r_waterdrawrefraction 0
r_dispenablelod 0
r_fastzreject 0
r_waterforceexpensive 0
r_eyeshift_z "0"
r_eyeshift_y "0"
r_eyeshift_x "0"
r_eyemove "0"
r_eyegloss "0"
r_drawmodeldecals 0
r_rainsimulate 0
rope_averagelight 0
rope_wind_dist 0
r_decals "1"
r_drawflecks "0"
r_maxmodeldecal "1"
r_fastzreject "1"
r_mmx 1
r_sse 1
r_sse2 1
r_shadows "0"
r_occlusion "0"
r_modellodscale "0.1"
r_mode "4"
r_avglightmap "0"
dsp_enhance_stereo "1"

cl_crosshairusealpha 0
cl_crosshairalpha 999
cl_dynamiccrosshair 0

net_graph 3
net_graphpos 1

cl_downloadfilter "nosounds"
cl_autohelp "0"
jpeg_quality 100
mat_monitorgamma 1.6

bind "u" "buy mp5; buy secammo; buy flashbang; buy flashbang; buy defuser; buy vesthelm; buy hegrenade"

bind "-" "cl_crosshairscale 4000"

bind "t" "spraylogo"
cl_restrict_server_commands 0
zoom_sensitivity_ratio 1
name "stalkers"
sv_showimpacts 3

mp_decals 50
r_decals 50
//r_dispradius 50
//r_dispfullradius 50
//r_propsmaxdist 500
//r_rainradius 0
//r_rainsplashpercentage 0

sensitivity 1.8
r_shadows 0
cl_smooth 0
gl_cull "1"
gl_max_size "256"
precache 1
cl_interp 0.1
cl_updaterate 99
max_shells 1
max_smokepuffs 1

here is my cfg if you can see any probs please let me know ..

Many Thanks

stalkers(sco)

[s87source]

Need a lil help here. Everytime I have try to save my userconfig.cfg file it only saves it as a text file, how do I go about saving it as a rel CFG file. Also, should I get rid of my config file if I use a userconfig? Right now I have a config.cfg and autoexec.cfg file but still cant get that userconfig to save as a cfg file.

[DeeK]

in notepad go to file > save as then change the bottom bit to all files

and type autoexec.cfg or userconfig.cfg

[BlAcK||iCe]

Keep your config.cfg as well - that stores all your other settings like keyboard mapping etc.

[s87source]

Okay, thanks for the help. But heres another problem.

I opened up my config file and this is what it looked like in notepad.
http://i23.tinypic.com/adlrhc.jpg
Is there a way to fix that so its all line by line?

Also, Where can I find Rew Skys config from the Pwnage Guide? I wanna get the same one he has that makes all the walls and what not high fps. Also so I can tweak it myself. Thanks.

[BlAcK||iCe]

Is there a way to fix that so its all line by line?

Also, Where can I find Rew Skys config from the Pwnage Guide? I wanna get the same one he has that makes all the walls and what not high fps.


1. Just press <return> after each command :P

2. Unfortunately the commands that are used are no longer allowed unless the server you're playing on has sv_cheats 1...So it's pretty much useless, I'm afraid.

[Hazard]

Okay, thanks for the help. But heres another problem.

I opened up my config file and this is what it looked like in notepad.

Is there a way to fix that so its all line by line?



Just open it in wordpad and it will be formatted correctly.

[kmanmx]

Any point in the cfg if my FPS averages at 180?

I have max settings possible (except res, which is 1650x1080)

Anyway will i gain much from the cfg ?

[fletchy]

//mat_mipmaptextures 0
//mat_specular 0
//mat_trilinear 0
//mat_antialias 0
//mat_vsync 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_drawmodeldecals 0
r_rainsimulate 0
r_shadows 0
r_waterdrawreflection 0
r_waterdrawrefraction 0
r_dispenablelod 0
r_fastzreject 0
cl_dynamiccrosshair 0
cl_crosshairscale 500
cl_interpolate 1
cl_interp 0
cl_showfps 0
con_enable 1
//mat_show_texture_memory_usage 0
cl_phys_props_max 0
mp_decals 50
r_decals 50
//r_dispradius 50
//r_dispfullradius 50
//r_propsmaxdist 500
//r_rainradius 0
//r_rainsplashpercentage 0
rate 25000
cl_cmdrate 33
cl_updatetrate 40
name "Name"
zoom_sensitivity_ratio 1.2
sensitivity 6.5
r_shadows 0
cl_smooth 0
gl_cull "1"
gl_max_size "256"
precache 1
cl_interp 0.1
cl_updaterate 99
max_shells 1
max_smokepuffs 1

bind v "buy m4a1; buy ak47; buy vest; buy buyammo1; buy vesthelm; buy hegrenade"
//========================
echo :::The Pig's Config has been loaded:::
//========================




Save it and dont chose txt doc make it all files

[RusBeton]

@ThePig

in your config u used the command cl_updaterate twice ^__^
once with cl_updaterate 40 and once with cl_updaterate 99
what is your real one ?

[ThePig]

they are both at 99 with no choke. We use comcast cable. Check your net graph 3 to monitor your choke while adjusting your cl cmdrate and updaterate